Copper Pipe Shelving unit in an Industrial / Urban / Vintage style. 2 Tier Hand Crafted Shelves with African Sapele Hardwood #africanstyleclothing
Copper Pipe Clothes hanger hooks in an Industrial / Urban / Vintage style. Hand Crafted Hangers with African Sapele Hardwood.INDUSTRIAL COPPER AND RECLAIMED WOOD SHELVING: 3 Column, 2 Tier - In a Natural or Polished & Lacquered finish. This handmade shelving unit is made using 15mm copper pipe and planks of African Sapele timber. Each copper joint is professionally soldered making it a strong and one solid piece. The African Sapele wood has been sealed with Oil and is Biscuit jointed, routed, sanded and then mounted on a raised floating platform using specialist brass clips. The pictures show the copper in a Polished & Lacquered finish that will maintain it's bright, reflective shine. A natural finish will arrive to you with the same appearance and will then darken over time to a warm, deep brown industrial colour. You can see examples of copper finishes on our Instagram page. The item will be custom made so as soon as you place an order, we’ll start crafting. From the moment you place the order, we aim to have your new shelving at your door in approx 1-2 weeks. Please allow extra time for worldwide deliveries. Please visit our Website or Instagram page to see our workshop and products we've made for our customers - http://plankandpipe.co.uk/ https://instagram.com/plankandpipe/ DIMENSIONS: Overall measurements - W: 600mm H: 600mm D: 250mm Spacing of shelves (1 to 2) - H: 420mm Gap/clearance between shelves (1 to 2) - H: 360mm INSTALLATION: Where possible try to install the shelving on a solid masonry wall. For this we recommend to use 2”8’s screws and red plugs using a 5.5mm drill bit to make the fixing holes. For Stud walls (Plasterboard), we recommend you use either an appropriate plasterboard fixing, fix into existing studs/timber batons or install a suitable sheet of plywood within the wall. ADDITIONAL OPTIONS: Please contact us if you would like to explore custom options, or discuss measurements and finishes. Please note that custom measurements and requirements will usually cost more. DISCLAIMER: The appearance of copper, brass and timber finishes may differ from the images attached. However it will be made using the exact same materials and we will make your order as close to the images as possible. Dimensions stated are approximate and suitable tolerances/clearance space around this unit should be considered. We test each initial design we make. However we cannot guarantee what the strength of the piece will be. We advise that the item is not placed under heavy loads and not subject to high forms of stress.